S-SERIES

Description

Design: Drive speeds to 1800 rpm; discharge pressures
to 200 psi; flow rate to 32.0 gpm; foot or flange mounted;
with or without integral relief valve.

Material: Cast Iron casings with precision machined,
heat treated gears and case hardened shafts. Pumps are
also available in Ductile Iron and Steel.
Bearings: Replaceable iron sleeve bearings. Also
available with carbon graphite or bronze bearings.

Seal: Mechanical seal. Also available with compression
packing or lip seal. Mechanical seal and lip seals available
with different elastomers for pumping different types of
liquids.

Lubrication: Self lubricating using the pumped liquid. Also
available for handling non-lubricating liquids.
Rotation: Pumps are available for clockwise or counter-
clockwise rotation. Discharge is always on the side of the
pump toward which the top of the shaft rotates. Specify at time
of order.

Liquid Viscosities: 32 ssu to 100,000 ssu. Adaptable for
handling liquids from water soluble to molten lead.
Suction Lift: 28″ Hg / 31 feet depending on the type of liquid
being pumped.

Drive Options: E-Drive (pump close coupled to motor); A-
Drive (pump connected to c-face motor with adapter bracket
and coupling); D-Drive (pump coupled to motor mounted on
baseplate);GR-Drive (pump coupled to gear reducer coupled to
motor mounted on baseplate); B-Drive (pump and motor
connected by V-belt and pulleys mounted on baseplate).
Accessories: Repair Kits; Gear Sets; Bearing Kits; and Seal
Kits. Refer to Section 13.